You are here: Home / CS 3600

Training Catalog        PremiumTraining       Webinars        
 
CS 3600 Training - English (EN)

CS 3600: Acquiring a 3D Model for a Hybrid Restoration Recorded Class (v 3.1) - This recorded class is designed for clinical team members and provides instruction on acquiring a 3D model. This class details the steps to acquire images of the upper jaw, lower jaw, and the buccal bite registration; and teaches you how to prepare a scan and check it for consistency and quality. The Hybrid workflow was developed to help practitioners challenged by scanning deep or subgingival margin lines or cases with excess bleeding. (8 mins)
Click here to start this courseView Course Properties

CS 3600: Acquiring a 3D Model for a Restoration Recorded Class (v 3.1) - This recorded class is designed for all team members and provides instruction on using the CS 3600 to acquire a 3D model for a restoration. By the end of this class you should be able to capture a partial arch using the CS 3600 and refine and export the image. (7 min)
Click here to start this courseView Course Properties

CS 3600: Acquiring a 3D Model for Implants Recorded Class (v 3.1) - This recorded class is designed for all team members and provides instruction on using the CS 3600 to acquire a 3D model for implants. By the end of this class you should be able to capture a partial arch and implant using the CS 3600, cut out the implant area and acquire the scan body located on the implant, and refine and export the image. (9 min)
Click here to start this courseView Course Properties

CS 3600: Acquiring a 3D Model for Orthodontics Recorded Class - This recorded class is designed for all team members and provides instruction on using the CS 3600 to acquire a 3D model for Orthodontics. By the end of this class you should be able to capture a full arch using the CS 3600 and refine and export the image. (6 min)
Click here to start this courseView Course Properties

CS 3600: Acquiring a 3D Model for Orthodontics Recorded Class (v 3.1) - This recorded class is designed for all team members and provides instruction on using the CS 3600 to acquire a 3D model for Orthodontics. By the end of this class you should be able to capture a full arch using the CS 3600 and refine and export the image. (7 mins)
Click here to start this courseView Course Properties

CS 3600: Capturing Buccal Bite Images Help Demo - This beginning-level help demo is intended for all team members. It provides instruction on capturing buccal bite images using the CS 3600. By the end of this help demo, you should be able to successfully capture multiple buccal bite images using the CS 3600. (6 min)
Click here to start this courseView Course Properties

CS 3600: Checking Video Card Settings Help Demo - This beginning-level help demo is intended for all team members. It provides instruction on the steps for checking your video card settings (2 min).
Click here to start this courseView Course Properties

CS 3600: Cleaning and Maintenance Recorded Class - This beginning-level recorded class is intended for all team members who want to learn how to clean and maintain the CS 3600. By the end of this class, you should be able to clean and maintain the CS 3600. (2 min)
Click here to start this courseView Course Properties

CS 3600: Component Overview Recorded Class - This beginning-level recorded class is intended for all team members. It provides an overview of the CS 3600. By the end of this class, you should be able to identify the components and controls of the CS 3600. (2 min)
Click here to start this courseView Course Properties

CS 3600: Correcting a Mislabeled Arch Tips and Tricks Help Demo - This beginning-level help demo is intended for all team members. It provides some tips and tricks that you can use to acquire a more efficient 3D model. By the end of this help demo, you should be able to correct a mislabeled arch. (3 min)
Click here to start this courseView Course Properties

CS 3600: Importing a CSZ File Help Demo - This beginning-level help demo is intended for all team members. By the end of this help demo, you should be able to import a .csz file into the CS 3600.
Click here to start this courseView Course Properties

CS 3600: Importing and Exporting Images Recorded Class - This recorded class is designed for clinical team members and provides instruction on importing and exporting images. By the end of this class you should be able to import and export images. (5 minutes)
Click here to start this courseView Course Properties

CS 3600: Proper Scanning Techniques Help Demo - This beginning-level help demo is intended for all team members. By the end of this help demo, you should be able to use proper scanning techniques when using the CS 3600.
Click here to start this courseView Course Properties

CS 3600: Scanning the Arches Tips and Tricks Help Demo - This beginning-level help demo is intended for all team members. It provides some tips and tricks that you can use to acquire a more efficient 3D model. By the end of this help demo, you should have a better understanding of the CS 3600 and how it can be used to efficiently scan the upper and lower arches. (9 min)
Click here to start this courseView Course Properties

CS 3600: Scanning the Buccal Bite Tips and Tricks Help Demo - This beginning-level help demo is intended for all team members. It provides some tips and tricks that you can use to acquire a more efficient 3D model. By the end of this help demo, you should have a better understanding of the CS 3600 and how it can be used to efficiently scan the buccal bite. (2 min)
Click here to start this courseView Course Properties

CS 3600: Scanning the Palate Tips and Tricks Help Demo - This beginning-level help demo is intended for all team members. It provides some tips and tricks that you can use to acquire a more efficient 3D model. By the end of this help demo, you should have a better understanding of the CS 3600 and how it can be used to efficiently scan the palate. (1 min)
Click here to start this courseView Course Properties

CS 3600: Submitting Scan Check Cases Job Aid - This one-page job aid is designed for clinical team members who use the CS 3600 intraoral scanner and provides information on how to submit scan check cases. Before you submit scan check cases, make sure CS Connect has been installed and configured at your practice.
Click here to start this courseView Course Properties

CS 3600: Timed Orthodontic Scanning Help Demo - This beginning-level help demo is intended for all team members. By the end of this help demo, you should be able to understand how fast and effective the CS 3600 is in scanning an Orthodontic patient.
Click here to start this courseView Course Properties

CS 3600: Tips and Tricks Overview Help Demo - This beginning-level help demo is intended for all team members. It provides an overview of the CS 3600 as well as some tips and tricks that you can use to acquire a more efficient 3D model. By the end of this help demo, you should have a better understanding of the CS 3600 and how best it can be used for efficient scanning. (3 min)
Click here to start this courseView Course Properties

CS 3600: Troubleshooting Recorded Class - This recorded class is designed for clinical team members and provides instruction on resolving common issues with the CS 3600. By the end of this class you should be able to troubleshoot common issues with the CS 3600. (8 minutes)
Click here to start this courseView Course Properties

CS 3600: Understanding Traditional vs Digital Impressions Help Demo - This beginning-level help demo is intended for all team members. By the end of this help demo, you should be able to understand the difference between a traditional and digital impression.
Click here to start this courseView Course Properties

CS 3600: Using the CS Mesh Viewer Help Demo - This beginning-level help demo is intended for all team members. It provides instruction on using the CS Mesh Viewer. By the end of this help demo, you should be able to use the CS Mesh Viewer to view digital impression files taken with the CS 3600. (3 min)
Click here to start this courseView Course Properties

CS 3600: Using the Margin Line Tool Help Demo - This beginning-level help demo is intended for all team members. It provides instruction on using the Margin Tool in the CS 3D Software. By the end of this help demo, you should be able to use the auto margin-marking tool on a digital impression. (3 min)
Click here to start this courseView Course Properties

CS 3600: Working with a Refined Image Tips and Tricks Help Demo - This beginning-level help demo is intended for all team members. It provides some tips and tricks that you can use to acquire a more efficient 3D model. By the end of this help demo, you should be able to work with a refined image. (3 min)
Click here to start this courseView Course Properties

CS Connect: Submitting a Case to a Lab Handout - This multi-page handout is designed for Carestream Imaging software users and provides instructions for submitting a case to a lab using CS Connect software.
Click here to start this courseView Course Properties

CS Intraoral Scanner: Acquiring a 3D Model for a Restoration Using ScanFlow Recorded Class (v. ScanFlow) - This recorded class is designed for clinical team members and provides instruction on acquiring a 3D model. This class details the steps to acquire images of the upper jaw, lower jaw, and the buccal bite registration; and teaches you how to prepare a scan and check it for consistency and quality. (7 mins) NEW! July 2019
Click here to start this courseView Course Properties

CS Intraoral Scanner: Acquiring a 3D Model for Implants Using ScanFlow Recorded Class (v. ScanFlow) - This recorded class is designed for clinical team members and provides instruction on acquiring a 3D model. This class details the steps to acquire images of the upper jaw, lower jaw, and the buccal bite registration; and teaches you how to prepare a scan and check it for consistency and quality. (8 mins) NEW! July 2019
Click here to start this courseView Course Properties

CS Intraoral Scanner: Acquiring a 3D Model for Orthodontics Using ScanFlow Recorded Class (v. ScanFlow) - This recorded class is designed for clinical team members and provides instruction on acquiring a 3D model. This class details the steps to acquire images of the upper jaw, lower jaw, and the buccal bite registration; and teaches you how to prepare a scan and check it for consistency and quality. (7 mins) NEW! July 2019
Click here to start this courseView Course Properties

  User Links